Skip to header Skip to main navigation Skip to main content Skip to footer
Home
Post Falls Idaho
Where Nature Welcomes You Home

Main navigation

  • Home
  • Dining
  • Lodging
  • Shopping
  • Things to Do
  • Outdoors
  • History
  • Business Directory
  • Webcams
  • 7-Day Weather Forecast (opens in new tab)

Three Dams in Two Years: How Post Falls Built Its Powerhouse River

Aerial view of the historic red-brick Post Falls powerhouse on the middle channel of the Spokane River, with water falling beside it.

Did you know Post Falls Dam is not really one dam at all? About nine miles downstream from Coeur d'Alene Lake, the Spokane River splits into three channels, each with its own natural falls, before the channels rejoin below the gorge. To harness that drop, builders had to dam all three channels at once, and the brick powerhouse they raised in the middle channel in 1906 is still generating electricity today.

Frederick Post saw the site's promise first. He built a sawmill here and a timber-crib dam across the north channel, about 20 feet high and several logs thick, with no head gates, so high water simply flowed over the top. When fire destroyed his mill in 1902, the dam survived undamaged. Two years later, the newly formed Washington Water Power Company bought Post's site and set out to build a hydroelectric plant that would send power to mines nearly 100 miles away, over what was then the longest high-voltage transmission line in the world.

The construction itself was an exercise in ingenuity. Post's wooden dam was so well built that crews reused it as a cofferdam for the new north channel dam, bolting its base to bedrock and filling it with concrete. Workers strung towers and a trolley system overhead to deliver lumber for forms, carry concrete, and lift head gates, which let them build the powerhouse in the middle channel while spring runoff passed freely through the north and south channels. The company even built a 60-kilovolt line from Spokane to power the job site, and in winter crews used a steam boiler to heat water for concrete and piped steam under tarps so the concrete could set in freezing weather.

Each dam got a different job. The middle channel, the deepest and most confined, held the 175-foot-long brick and mortar powerhouse, its dam forming the building's upstream wall. The north and south channel dams controlled spill during high flows and held the forebay level when flows were low. The powerhouse was built for six generating units, though only five were installed at first, three in 1906, a fourth in 1907, and a fifth in 1908. A sixth unit finally arrived in the 1980s, bringing the plant to 14.75 megawatts.

More than a century later, Avista, as Washington Water Power is now known, still runs the plant, whose six units produce up to about 15 megawatts, enough, Avista says, to power 11,250 homes, while the north and south dams help control summer water levels on Coeur d'Alene Lake. The work never really ends: Avista assessed the north channel dam in 2021 and began a spillway rehabilitation in spring 2024, scheduled through spring 2027, replacing nine spillway gates, their hoists, piers, and abutments. From Falls Park, visitors can still watch the river thunder through those gates, over the same falls that first drew Frederick Post here.

Post Falls Idaho
Idaho History
Spokane River
Falls Park
Kootenai County
North Idaho
City of Post Falls

Copyright © 2026 Rocky Mountain Madman LLC - All rights reserved

Developed and Designed by Rocky Mountain Madman LLC